Rifle is a Bula Defense Systems XM21 with all Bula parts including trigger group, gas cylinder, stamped spring guide, except for SEI Vortex muzzle brake using Bula Ultra Heavy 22" 1:10 National Match barrel and Hawk's kit. Action is now bedded in a USGI fiberglass stock. Scope is a NightForce Beast on ARMs #22 quick detatch rings.
BULA DEFENSE SYSTEMS XM21 #209
BULA DEFENSE SYSTEMS XM-21 #209 GOES TO THE RANGE
Breaking in the barrel on Bula XM21 #209 that I just put together recently. Took the scope off and removed the action for more clearance work in the ferule area. This is a USGI figerglass stock so we can't expect much accuracy. Not bedded yet but pretty tight at any rate. Target 1 is cold clean bore after sticking the scope back on. 1.5 moa to the right with elevation pretty good. 2 is second 10 rnd group with a bit of over correction. Targets 3 and 4 was making scope as adjustment. 5 is the final 10 rnd group of the 50 rnds fired today. Target six was shot a couple days later.
BULA #209 IS STARTING TO SETTLED DOWN
Got out with XM21 #209 for a few minutes this morning. Strapped on a Leupold MK- 4 16 x fixed to be similar to military scopes of a certain vintage. Temp 35 with a very light, almost still wind. Ammo is RA-68 cases with a 115 gn Berger fb over 45 gn of Norma 201 touched off with 210Ms running at 3,000 fps. Clean cold bore 10 rnd group at 100 is 1" max spread with an average of under .75 shot of a bipod, not benchrest. Another 10 dot rifle for sure.
guns in america, an explanation
for our european friends
NAVIGATION
ALL OF THE PHOTOS AND TEXT ON THIS SITE IS COPYRIGHTED. NO PORTION MAY BE REPRODUCED WITHOUT EXPRESSED WRITTEN CONSENT.
Join the N.R.A., Save Your Rights
